Availability: | |
---|---|
Quantity: | |
E27 PIR Infrared Motion Sensor LED Light Lamp Holder Base Luminous Adjustment PIR Motion Sensor Switch Light Holder Socket
Specification
Product name: The human body induction lamp holder
Lamp base: E27
Working voltage: AC110-240V 50/60Hz
The load power: less than or equal to 50W
Load types: suitabel for LED lights, energy-saving lamps, not suitable for incandescent lamp.
Induction angle and distance: 120 degree angle, 3 to 8 meters.
Sensitivity adjustment range: 5-5000Lux
Delay time adjusting range: 10s-600s(factory settings in 10-60s)
Mattters needing attention
1. You must ask professional, do not install charged and charged to adjust the adjustable knobs, to ensure that the installed power again.
2. It is forbidden to use Super load cannot beinstalled outdoors.
3. Do not install the induction lamp holder in bright light point-blank or cold and hot air around intersection place when installation should make induction lamp holder parallel to the direction and the direction of most human activities as far as possible.
Direction for use
1. Suitable for installation in Indoor stairs, corridor, corridor, warehouse, garage, the bathroom, the room, needs to open the door automatically turn off the lights, such as Indoor places.
2. Automatic induction, to lights, people go lamp delay shut down automatically, after the switch, the delay time, if someone activity in the area of the people left, delay some time, then shut down.
3. According to the figure installed switch, switch power up after a minute of initalization time, in this stage, the switch will automatically detect 0 to 3 times. If it is dark or dark or has taken the sensitivity adjustment knob counterclockwise transferred to the state of induction or bright light during the day, after switch, electric will work through to load. A minute later switch into the normal state.
E27 PIR Infrared Motion Sensor LED Light Lamp Holder Base Luminous Adjustment PIR Motion Sensor Switch Light Holder Socket
Specification
Product name: The human body induction lamp holder
Lamp base: E27
Working voltage: AC110-240V 50/60Hz
The load power: less than or equal to 50W
Load types: suitabel for LED lights, energy-saving lamps, not suitable for incandescent lamp.
Induction angle and distance: 120 degree angle, 3 to 8 meters.
Sensitivity adjustment range: 5-5000Lux
Delay time adjusting range: 10s-600s(factory settings in 10-60s)
Mattters needing attention
1. You must ask professional, do not install charged and charged to adjust the adjustable knobs, to ensure that the installed power again.
2. It is forbidden to use Super load cannot beinstalled outdoors.
3. Do not install the induction lamp holder in bright light point-blank or cold and hot air around intersection place when installation should make induction lamp holder parallel to the direction and the direction of most human activities as far as possible.
Direction for use
1. Suitable for installation in Indoor stairs, corridor, corridor, warehouse, garage, the bathroom, the room, needs to open the door automatically turn off the lights, such as Indoor places.
2. Automatic induction, to lights, people go lamp delay shut down automatically, after the switch, the delay time, if someone activity in the area of the people left, delay some time, then shut down.
3. According to the figure installed switch, switch power up after a minute of initalization time, in this stage, the switch will automatically detect 0 to 3 times. If it is dark or dark or has taken the sensitivity adjustment knob counterclockwise transferred to the state of induction or bright light during the day, after switch, electric will work through to load. A minute later switch into the normal state.